LeisureCraft Penguin Cold Therapy Chiller with Filter Kit

Make cold-water maintenance easier with the LeisureCraft Penguin Cold Therapy Chiller with Filter Kit. Designed for cold plunge and ice bath setups, this ¾ HP chiller provides consistent cooling without the need to continually purchase or add bags of ice. With an integrated circulation pump, filter kit, GFCI-protected power cord, and compact design, it is a practical solution for home wellness spaces and outdoor cold plunge installations.

Consistent Cold-Water Cooling

• Low-Temperature Performance: Designed to maintain water temperatures in the low 40°F range in most setups, with the potential to reach the high 30s°F under favorable conditions such as reduced sun exposure and adequate insulation.
• 7,500 BTU/hr Cooling Capacity: The ¾ HP high-efficiency chiller provides dedicated cooling performance for compatible cold plunge systems.
• Iceless Operation: Reduces the need for manually purchasing, transporting, and adding ice to maintain cold water.
• Indoor or Outdoor Use: Suitable for indoor and outdoor installations when operated in non-freezing conditions.

Integrated Pump & Filtration System

• Built-In Circulation Pump: Provides continuous water circulation through the cooling system.
• Included Filter Kit: Helps maintain cleaner circulating water and simplifies routine cold plunge maintenance.
• Gravity-Fed Priming: The system must be installed at or below the lowest drain point of the connected tub because the pump is not self-priming.
• Short Tubing Runs Recommended: Installation within approximately 3 feet of the tub drain helps maintain appropriate water flow.

Efficient & Quiet Operation

• Energy-Conscious Cooling: The compressor and fan operate when cooling is required, while the circulation pump runs continuously at low wattage.
• 450-Watt Power Draw: Operates on a standard 110–120V electrical supply with a rated draw of approximately 3.9 amps.
• 56 dBA Operating Noise: Designed for relatively quiet operation in home or outdoor wellness environments.
• 10-Foot GFCI-Protected Cord: Includes a long power cord with built-in GFCI protection for added electrical safety.

Compact Installation & Practical Design

• Space-Saving Footprint: Measures approximately 17" wide by 15" deep by 13" high for convenient placement near compatible cold plunge tubs.
• Rain-Resistant Construction: Designed for outdoor use, but the unit should be drained and disconnected when freezing temperatures are expected.
• Simple Installation Requirements: Position the chiller at the same level as or below the tub drain and avoid unnecessarily long plumbing runs.
• Made in the USA: Manufactured in the United States for dependable cold-water equipment performance.

Technical Specifications Summary

What's Included

• 1 × LeisureCraft Penguin ¾ HP Cold Therapy Chiller
• 1 × Built-In Circulation Pump
• 1 × Filter Kit
• 1 × GFCI-Protected 10-Foot Power Cord
• Installation & Operating Documentation

Installation Requirements

• Place the chiller within approximately 3 feet of the tub drain.
• Install the unit at the same level as or below the tub's lowest drain point.
• Use a gravity-fed setup because the integrated pump is not self-priming.
• Avoid unnecessarily long tubing runs to maintain adequate water flow.
• Drain and disconnect the unit before exposure to freezing temperatures.

Warranty

The LeisureCraft Penguin Cold Therapy Chiller with Filter Kit includes a 1-year product warranty.

Note: This product is intended for general wellness and comfort. It is not a medical device and is not intended to diagnose, treat, cure, or prevent any disease.